15ml Skin Color Oil Paints Set for Plastic Model Figures - Hand-Painting & Spraying DIY Coloring Tools

▲ Basic color paint usage instructions:
1. Mix the paint evenly before use, and then remove impurities such as oil and dust from the surface of the items;
2. Spray a layer of surfacer/primer to fill the uneven surface of the item, to improve the surface effect;
3. Except for ABS, it is best to spray a layer of surfacer/primer on plastic for better adhesion;
4. The dilution ratio is approximately: paint: diluent=1: 3-4, depending on the spray gun pressure and output
Adjust its viscosity based on the amount of oil paint. If the surface leveling is not good, please add diluent appropriately.
Please note when mixing paint:
1. If the paint is bright and the prepared paint is sprayed dry, without light, like powder, and will block the gun when sprayed, it indicates that the paint is too thick and needs to be slowly adjusted by adding diluents. Don't overdo it all at once;
2. If sprayed without paint; Poor covering power; Hanging (falling edge); When sprayed out, it looks very shiny, but after drying out, the gloss is not as ideal; If the above phenomena occur in the paint, it indicates that the paint is too thin and needs to be slowly added to adjust.