DIY Model Primer Spray Paint for Armor & Surface Filling - Water-Based

[Number]: PM.03-A.B.C.D

[Properties]: Opaque (black, white and gray) liquid, medium viscosity, there will be solid precipitation when left for a long time, and it needs to be shaken well before use. 

[Function]: It can fill in parts defects and provide strong adhesion for subsequent coatings.

[How to use]: Shake the paint well before use.Spray directly without dilution into the airbrush.With an air pressure of 0.15mpa~ 0.2mpa, the medium paint is swept and sprayed lightly.

[Drying time]: After spraying is completed, the replenishment soil will dry quickly. Wait 30 minutes in a room temperature (25 ° C) environment to continue coloring. If you need to polish, you need to wait 3-5 hours for complete drying. The drying time will be delayed under the condition of low ambient temperature/high humidity. On the premise of not being able to grasp drying, it is recommended to use waste or sample spraying control group. Note: After complete drying, the water replenishment soil will be integrated with the plastic and cannot be painted off.

[Shaking situation]: There is obvious stratification and precipitation phenomenon, and the shaking time is expected to be 1 minute.

[Precautions]: Melon seed water replenishment needs to use melon seed strong pen washing liquid to wash the pen! Another: This water has strong soil filling ability and rough surface (subsequent need to be polished), which can provide strong adhesion for subsequent coatings, but it is usually only used for pit filling repair. If you need to level the bottom surface, you can buy a water-free primer (PM.04-07(The series.