Professional Facial Steamer with Adjustable Swing Arm and Ozone UV Spa for Skin Care

Key Features:
160° Adjustable Swing Arm & 360° Nozzle: Never twist or stretch your neck again! The adjustable mechanical arm angles smoothly up to 160 degrees, and the nozzle rotates a full 360 degrees for comprehensive, targeted face spa treatment.
Deep Hydration Hot Mist with Ionic Ozone: Features independent "HOT" mist and "OZONE" (UV) dual-switch controls. Ultra-fine ionic steam opens up pores rapidly to deeply hydrate the skin, help release blackheads, and oxygenate the skin barrier.
High-Capacity Shatterproof Cup: Equipped with a premium 1L capacity high-temperature resistant water cup, delivering a generous, continuous, professional-grade spa steam for approx. 25 minutes per session.
Top Refill Design: Need to extend your session? Simply pop open the convenient top refill lid to add water directly without needing to turn off the machine or touch the hot lower cup.
Heavy-Duty 4-Wheel Rolling Base: Supported by a robust height-adjustable stand (52.8"-62.4") and a heavy-duty, ultra-smooth 4-caster swivel base for quiet and easy movement across your studio or home floor.

Specifications
Color: White
Item Weight: 6.28 lbs
Material: Premium Heavy-Duty PP + High-Grade Stainless Steel
Voltage/Frequency: 110V-120V/60Hz
Rated Power: 650W-800W Max (High Efficiency)
Adjustable Height: 52.8"-62.4"
Extension Pole Height Range: 28"-37"
Spray Arm Length:22.4"
Base Width: 23"
Water Cup Height: 5.7"
Water Cup Diameter: 4.3"
Power Cord Length: 55.5"
Water Cup Capacity: 1L
Arm Adjustable Range Approx. 160° Vertical Swing Angle

Step-by-Step Operating Instructions
1. Fill the Water Cup: Remove the water container and fill it with water. Ensure the water level does not exceed the maximum water line.
2. Power On (Standby): Connect the power cord. The indicator light above the "HOT" button will flash, indicating the device is in standby mode.
3. Start Operation & Ozone: Click the "HOT" button once. Both the "HOT" and "OZONE" indicator lights will turn on simultaneously, and the machine will start running. (Note: "OZONE" refers to the UV purification/ozone function; you can turn it off anytime by pressing the "OZONE" button).
4. Preheating: It takes about 8 minutes to preheat, after which a rich steam will begin to flow from the spray nozzle.
5. Auto Safety Shut-off: When the water level drops below the internal sensor rod, the device will automatically stop running and return to standby mode. A full cup of water provides approximately 25 minutes of continuous steam.
6. Refilling Water: Open the top lid to add water, then press the "HOT" button again to resume operation. (Crucial Safety Alert: Always turn off the device or disconnect the power cord before refilling to avoid accidental injury).
7. Post-Use Safety Notice: If the machine shuts down automatically due to low water and you wish to continue using it, always add water through the top inlet. Do NOT touch the hot water cup directly during or immediately after use to prevent burns.

Warm Usage Notices
Always follow the water line indicators on the clear water cup. Do not overfill to prevent hot water spitting.
Please use distilled or purified water for optimal mist performance and longevity of the heating element. Do not add essential oils directly into the water tank.
Ensure the base screws are securely tightened during initial assembly to maintain perfect upright stability.