USB Mini Hair Removal Wax Warmer Kit - Facial & Body Waxing Device

Product parameter: Model No.:SS-2305 Dimensions:φ52*40mm Voltage: 5V Current: 1.5APower: 7W Capacity: Wax Beans 8g (0.28oz)Maximum Temperature:120+10℃C Instructions for Use: Step 1:Wax Preparation: 1.Unscrew the lid of the wax heater and pour an appropriate amount of waxinto the silicone pot.Step 2: Heating the wax 1. Connect the USB interface to a power source, and the device will startheating (indicated by a red light).2. Wait about 15 minutes for the light to turn green,indicating that the produciis ready for use. Sfir the wax using a wax applicator and perform a small patchtest on the inner wrist to check the temperature. Ensure that the femperatureis suitable for your skin before proceeding.Then you can follow theinstructions below for eyebrow shaping,nose and ear hair removal.Warm Tips:For optimal performance, use with an adapter plug rated at 5V, 2A or higher.If the current is below 1.5A, the wax melting time may be extended.When the heater indicator turns green, if there is a situation where a smallamount of wax has not fully melted, it is considered a normal occurrence. juststir it with a wooden stick before use.

Model No.:SS-2305

Dimensions:φ52*40mm

Voltage: 5V

Current: 1.5APower: 7W

Capacity: Wax Beans 8g (0.28oz)Maximum Temperature:120+10℃C

Instructions for Use:

Step 1:Wax Preparation:

1.Unscrew the lid of the wax heater and pour an appropriate amount of waxinto the silicone pot.Step 2: Heating the wax

1. Connect the USB interface to a power source, and the device will startheating (indicated by a red light).2. Wait about 15 minutes for the light to turn green,indicating that the produciis ready for use. Sfir the wax using a wax applicator and perform a small patchtest on the inner wrist to check the temperature. Ensure that the femperatureis suitable for your skin before proceeding.Then you can follow theinstructions below for eyebrow shaping,nose and ear hair removal.Warm Tips:For optimal performance, use with an adapter plug rated at 5V, 2A or higher.If the current is below 1.5A, the wax melting time may be extended.When the heater indicator turns green, if there is a situation where a smallamount of wax has not fully melted, it is considered a normal occurrence. juststir it with a wooden stick before use.