29.4V 3A/4A/5A Power Adapter Charger for 24V Electric Scooter Battery with XLR Plug
29.4V 3A/4A/5A Power Adapter Charger for 24V Electric Scooter Battery with XLR Plug
Product description
【********NOTE: The DC interface of this adapter is 3P XLR, which is only suitable for devices with the same specification DC interface. Cannot be used for other DC interface specification equipment. Please confirm before purchasing. Normally, the specifications of the DC port of the device will be marked on your device manual or label. The unmatched DC interface will not be able to supply power..********】
NOTE:
1.Before buying, be sure to confirm that the interface size of this product matches with yours. Wrong size will not work!!! ( The interface size of this product is 3P XLR).
2. This product has many kinds of protection functions, enter the protection mode, LED lights will flashing red light. When this happens, unplug the adapter immediately and check if the circuit is short-circuited, if the electrical power exceeds the rated power of the adapter, etc.
Parameter:
Input voltage: AC 110V / 220V (AC90-264V suitable for anywhere in the world voltage level).
Output: DC 29.4V 3A/4A/5A
Output Wire length: 1m / 3.28ft.
Output interface: 3P XLR
With built-in leaf spring, Compatible with 3P XLR.
With over-current protection, over-discharge protection, over-voltage protection, overcharge protection, short circuit protection.（Enter Protection mode , with flashing red light）.
Charging process LED indicator changes:
1. No-load status LED is green;
2. Charging, the first phase of constant current charging, LED indicator is red. Charge to the rated voltage into the second phase of constant voltage charging, the current slowly decreases.
3. When the battery power reaches 90-95%, LED lights turn green. At this point the charger will continue to charge with a small current until it is full.
Package Included:
1*29.4V Power Adapter Li-ion Battery Charger
Constant current & Constant voltage
The first stage is charged with a constant current; when the voltage reaches a predetermined value, it is transferred to the second stage for constant voltage charging, and the current gradually decreases; when the charging current reaches zero, the battery is fully charged.
Use and maintenance of the charger :
1. When charging, first connector to the battery, then connect to AC; after full, cut off AC,
then pull the battery plug. If you pull the battery plug first while charging, especially when
the charging current is large (red light), it is very easy to damage the charger.
2. LED display after turning green, then charge for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be
protected or even damaged.
4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-
called re-lighting, which is conducive to the activation of long-term immobile material in
the deep part of the battery. Luminous means that riding the controller battery
undervoltage protection action
5. If your battery has not been used for a long time (2-3 months), please charge the battery
before using it. Make sure your battery is not broken.
6.Please use the charger in a dry place in time.
7.When you do not use the charger, do not always connect the power supply.
8.Please confirm your battery, Because it is used to charge the lithium battery. Do not
use the charger on the LiFepo4 battery, otherwise the charger will be got incredibly hot.